The soap dispenser is also called an automatic soap dispenser, an automatic soap dispenser, perhaps a soap dispenser, a soap dispenser. The soap dispenser is a bathroom appliance that is used in the bathroom. When the user washes his hands, it automatically senses the soap or hand sanitizer to avoid secondary pollution from touching the hands. But many times the soap dispenser can't produce liquid. What should I do if this happens?
1. There is no detergent
Solution: When adding detergent to the soap dispenser, pay attention to adding 10% water to the outside of the soap dispenser to poke the bottom of the soap dispenser away, otherwise the soap dispenser will be blocked for a long time.
2, detergent is lighter
Treatment method: too weak detergent will cause the soap dispenser to fail to press the detergent, you can inject excess water outside the soap dispenser to concentrate the detergent. Both old and old soap dispensers can use this method. Assuming it is a new soap dispenser, you can indirectly add excess water to the outside of the soap dispenser before using it. When the soap dispenser is used, it will be easier to use by adding light to it.
3. Inferior soap dispenser
Solution: Assuming that you do not pay attention when buying a soap dispenser, it is easy to buy a low-quality soap dispenser. Inferior soap dispensers can be chrome-plated on ordinary steel, and fake soap dispensers made of stainless steel. If the soap dispenser is used for a long time, it will cause the detergent that is pressed out to be black, and it is not durable, and it is often blocked. There is a phenomenon that the soap dispenser cannot press the detergent.
4. Too much internal air
Solution: The non-essential way for the soap dispenser to press the detergent is to use a pressing tube. Assuming that there is too much air in the pressing tube, it is difficult to press the detergent. You can take out the pressing tube on the outside of the soap dispenser, and then clean the excess detergent outside, and use water to drain the air in the pressing tube. After pressing the tube device well, it can be used again.
5. The spring is old and broken
Solution: The spring in the soap dispenser is used to support the pressing of the detergent in the soap dispenser. Assuming that the spring in the soap dispenser is aging or broken, it will also cause the detergent to not be pressed out. Assuming that the spring is broken, it can be repaired, and you can replace it with a new one.
Ningbo Yiming Intelligent Technology Co., LTD., formerly known as Yuyao Yiming hardware and electrical factory, was founded in 2003. As a leading China Automatic Soap Sanitizer Dispensers Manufacturers and oem touchless automatic soap dispenser suppliers. After more than 15 years of hard work and carefully built, the company covers a total area of 5000 square meters, At present, the company has more than 150 employees. There are 20 injection molding machines, 6 assembly lines, automatic production has been achieved, can independently complete the mold, plastic products development, manufacturing. Specializing in Technology development, Home Appliance R&d, Intelligent instrument manufacturing, Hardware products manufacturing, wholesale touchless automatic soap dispensers, household appliances manufacturing, as well as production and sales. Warmly welcome customers at home and abroad to visit guidance, business negotiations!