Soap dispenser is also called active soap dispenser, active soap dispenser, or soap dispenser, soap dispenser. The soap dispenser is a bathroom appliance that is used in the bathroom. When the user washes his hands, it actively senses the soap or hand sanitizer to avoid secondary pollution of the hands. But many times the soap dispenser can't produce liquid. What should I do if this happens?

　　 1. There is no detergent

　　 Treatment method: When adding detergent to the soap dispenser, pay attention to adding 10% water to the outside of the soap dispenser to poke the bottom of the soap dispenser away. Otherwise, there will be less detergent for a long time, assuming that the soap dispenser is blocked.

　　2, detergent is thinner

　　 Treatment method: too thin detergent will cause the soap dispenser to fail to press the detergent, and excessive water can be injected outside the soap dispenser to concentrate the detergent. Both old and old soap dispensers can use this method. Assuming it is a new soap dispenser, it can indirectly participate in excess water outside the soap dispenser and then use it. The time when the soap dispenser is used plus the effect of light will make it easier to use.

　　3, inferior soap dispenser

　　 Treatment method: If you do not pay attention when setting up the soap dispenser, it is easy to buy a defective soap dispenser. Inferior soap dispensers can be chrome-plated on ordinary steel, pretending to be stainless steel soap dispensers. If the soap dispenser is used for a long time, it will cause the detergent that is pressed out to be black, and it is not durable, and it is often blocked. There is a phenomenon that the soap dispenser cannot press the detergent.

　　 4. Too much internal air

　　 Treatment method: The non-essential method of pressing the detergent with the soap dispenser is to use a pressing tube. If there is too much air in the pressing tube, it will be difficult to press the detergent. The pressing tube outside the soap dispenser can be taken out, and then the excess detergent outside is cleaned, and the air in the pressing tube is drained with water. After pressing the tube device well, it can be used again.

　　 5. The tension spring is old and broken

　　 Treatment method: The tension spring in the soap dispenser is used to support the pressing of the detergent in the soap dispenser. If the tension spring in the soap dispenser is aging or broken, it will also cause the detergent to not be pressed out. Assuming that the tension spring is broken, it can be repaired, and it can be replaced with a new one.

Ningbo Yiming Intelligent Technology Co., LTD., formerly known as Yuyao Yiming hardware and electrical factory, was founded in 2003. As a leading China Automatic Soap Sanitizer Dispensers Manufacturers and oem touchless automatic soap dispenser suppliers. After more than 15 years of hard work and carefully built, the company covers a total area of 5000 square meters, At present, the company has more than 150 employees. There are 20 injection molding machines, 6 assembly lines, automatic production has been achieved, can independently complete the mold, plastic products development, manufacturing. Specializing in Technology development, Home Appliance R&d, Intelligent instrument manufacturing, Hardware products manufacturing, wholesale touchless automatic soap dispensers, household appliances manufacturing, as well as production and sales. Warmly welcome customers at home and abroad to visit guidance, business negotiations!