What are the precautions for the purchase and installation of the soap dispenser？
Posted by Admin
The purchase of soap dispenser can start from the following three aspects
1. Working principle
From the working principle of the soap dispenser, there are two types: automatic soap dispenser and manual soap dispenser. The automatic soap dispenser is also called the induction soap dispenser. It uses infrared technology to automatically squeeze a certain amount of soap out of the liquid outlet when it senses that the human body is approaching. This kind of soap dispenser is more expensive, and it is generally used in public places because it will look higher and more advanced. The manual soap dispenser is a device that can get the soap through the button. Its design does not require electricity, and manually controls the amount of liquid, which is more suitable for home use.
2. Installation method
There are three types of installation methods: placing type, wall type and sink type. The placing type soap dispenser can be placed directly on the sink, no installation is required, and it is easy to move. The wall-mounted type uses screws to fix the soap dispenser on the wall, which will damage the wall during installation, but saves space. The sink type soap dispenser is a combination of the sink and the soap dispenser, which is complicated to install and has a strong sense of overall design.
3. Material style
The material of the soap dispenser is usually stainless steel and plastic. Stainless steel is beautiful and durable, but it is not convenient to see the amount of soap used. Plastics are colorful, light and fashionable, and cost-effective. It is recommended to use plastic for soap dispensers at home.
Installation skills of soap dispenser
If you choose the placed type soap dispenser, you don't need to consider the installation problem, just put it in a convenient place. They are usually placed next to the sink.
If it is a sink type soap dispenser, this requires professional staff to install it, because in addition to the liquid outlet, the location of the water outlet must be designed well. If it is a wall-mounted soap dispenser, although it needs to be installed, it can be done by yourself, but you need to pay attention to the installation method.
Choose an appropriate installation location. For the convenience of use, the wall-mounted soap dispenser should not be installed too far from the sink. A suitable location is 30 cm to the left or right above the sink. If there are still towels hung on the sink, you can move the soap dispenser further to the sides to avoid crowding.
Because it is fixed with screws, holes will be drilled in the wall. After the location is selected, the location of the drilling must be determined to avoid excessive damage to the wall. In order to strengthen the fixing effect, a rubber plug should be installed when installing the screws, which can also protect the wall hole from falling slag and no longer expanding.
Whether the head cable is well connected and whether it is installed tightly; the power plug should be the water source to avoid safety accidents.