1. When using the soap dispenser for the first time, add water first, drain the vacuum inside, and then add soap. In addition, when using the soap dispenser for the first time, the inner bottle and pump head may contain some water. , don't worry, because this is not the quality problem of the product but the leftover from the inspection before the product leaves the factory.
2. If the soap in the soap dispenser is too thick, it may make the soap dispenser out of liquid, so in order to dilute the soap, you can add a little water to the soap bottle of the soap dispenser and stir it. , you can bleed.
3. The dust and impurities in the soap will block the liquid outlet, so if you notice that the soap in the soap bottle of the soap dispenser has deteriorated, you should change the soap in time to avoid clogging the soap. Trouble with the liquid outlet.
4. If the soap dispenser has been idle for a period of time, some soap may condense in the soap dispenser. At this time, the following methods can be used to solve the problem. (1) If the amount of soap is small, it can be stirred with warm water. The soap is reduced to a liquid. (2) If the above method is not feasible, remove the condensed soap, add warm water, and use the soap dispenser several times until the warm water drains from the soap dispenser, which is Rinse the entire soap dispenser, then refill it with soap and it's ready to use.